HAIMEN MATHAIMEN MAT

When it helps

• A roller is hard to use on the back.
• A stacked sheet does not follow the body.
• You want less disposable-sheet waste.

Follows the back

Contact area is about 2.6 times a typical adhesive sheet. With a typical sheet as 100, the measured result was 259.

Wipe and use again

Spray water or the cleaner and wipe with a damp cloth. The sheet can also be washed on its own. Dry it well before putting it back.

Antibacterial and antifungal

The sheet includes antibacterial and antifungal agents.

You can move it

The sheet and the fixing gel can be peeled and placed again. Some walls will not hold it. Test a hidden spot first. Avoid soft PVC.

The soft adhesive sheet and mat follow the deep contours of the back. The sheet and the fixing urethane gel can be peeled and placed again, so the position can be adjusted.

Front

Back

Wall-fixing urethane gel (gel tack sheet adhesive attached)

Side

Polyurethane adhesive sheet (dust catcher)

Cushion mat (cover: polyurethane + urethane film / sponge: urethane foam)

Wall-fixing urethane gel

Use it to finish after a roller.

• 

  Antechamber

The layout below is an effective way to install it.

• Clean area
• Semi-clean area
• Contaminated area

Dust catcherInside the air shower

HAIMEN MATBefore entering the workroom

Body roller / D-QuickBefore entering the workroom

STEPMATWhere dirt falls, and at doors between zones of different cleanliness

TIP REMOVERWork where dirt must not reach the product

Lift matA doorway that indoor vehicles pass through

• It finishes what the roller starts.

  A roller alone left us unsure about the back. With HAIMEN MAT the whole back meets the sheet, so we can tell the dust is gone.

• It follows the shape of the back.

  A stacked mat did not fit the back. The soft sheet and cushion follow the contours, and it is easy to use.

• Easy to manage, and easy to move.

  The mat peels off, so we can move it as the work changes. The antibacterial and antifungal sheet is reassuring.

• There is less waste.

  Disposable sheets made a lot of waste, and peeled dirt could fall off. HAIMEN MAT is wiped or washed and used again, with no sheet waste.

How often should it be replaced?

About every 1 to 2 years, depending on how often it is used and where it is installed.

Can it be used where things get wet?

Water weakens the tack, so it does not work as intended. Use it in a dry place.

How do you clean it?

Spray water or the cleaner, then wipe with a cloth that was wet and wrung out. The adhesive sheet can also be peeled off and washed.