With IPA
- Max
- 126.2%
- Average
- 83.5%
- Min
- 15.4%
- Upper spec
- 180%
- Lower spec
- 40%
- Sigma
- 10.51%
- Cpk
- 2.22 / 1.38
Large scatter remains, so the risk of defects stays.
NEW
Underside-wipe cleaner for metal stencils
It is meant to move underside wiping away from IPA. No flash point, lower cost, and outside the usual hazardous-goods rules. FUJI and Yamaha Motor have adopted it as a recommended underside-wipe cleaner.
Made for the floor
Safety, environment, cost
No flash point. Outside the organic-solvent rules, the Fire Service Act, and China GB. Surfactant-free. It does not need hazardous-goods handling, so storage and control stay simple.
No flash point
Outside key regulations
Surfactant-free
Easy to store
Recommended by printer makers
FUJI and Yamaha Motor have formally adopted it as a recommended underside-wipe cleaner. SMT floors value the safety, the handling, and the print quality.
The press releases are here.
More stable printing
A higher Cp than IPA
IPA: Cp 2.22. URABUKIN-CHAN: Cp 3.34. Scatter is smaller, and in one case the first board after a restart printed stably.
With URABUKIN-CHAN
- Max
- 108.0%
- Average
- 85.7%
- Min
- 51.8%
- Upper spec
- 180%
- Lower spec
- 40%
- Sigma
- 6.99%
- Cpk
- 3.34 / 2.17
Scatter is very small, and printing stays stable from the first board after a restart.
Why it wipes clean and leaves little behind
A surfactant-free formula
Wetting and drying are balanced. High wetting lifts the wipe, the return pass finishes the wipe, and the formula is less likely to leave contamination.
IPA wipe mechanism
1Outward (wet)
- 1. Outward wipeIPA spreads the flux while wiping.
- 2. After wipeIPA evaporates at once and leaves the flux smeared.
2Return (dry)
- 3. Return suctionSuction runs while the surface is already dry.
- 4. After suctionThe smeared flux remains.
It evaporates before the return pass and leaves the flux smeared.
URABUKIN-CHAN wipe mechanism
1Outward (wet)
- 1. Outward wipeThe wipe keeps a light wetness.
- 2. After wipeA thin wet film remains, so the flux does not dry hard.
2Return (dry)
- 3. Return suctionThe return pass suctions the wetness and the flux together.
- 4. After suctionThe surface dries and little flux remains.
It keeps a light wetness, then the return wipe removes the flux efficiently.
Specifications
- Model
- UB-0701U
- Flash point
- None
- Organic-solvent rules
- Not applicable
- Fire Service Act
- Not applicable
- Pack
- UN can, 12 kg
| Model | UB-0701U |
|---|---|
| Flash point | None |
| Organic-solvent rules | Not applicable |
| Fire Service Act | Not applicable |
| Pack | UN can, 12 kg |
It is developed to perform best as an underside wipe. Other uses are not recommended. Specs and appearance may change without notice.
Contact
If you have a question or would like to talk, please get in touch.