EXSEAL
Factory Environment Solutions
TIP REMOVER
Washable & Reusable Urethane Gel for Removing Finger Dirt and Sebum
Tip Remover is a urethane gel designed to remove dirt and sebum from the fingertips of gloves.
Simply squeeze it to clean your fingertips — when it gets dirty, just rinse with water and reuse.
Perfect for those who have the following concerns:
• Currently using a roller to clean glove tips but want an easier solution
• Want to remove fingertip dust during work without interrupting the workflow
• Want to demonstrate contamination control efforts during audits
Features
The urethane gel fits your fingertips
Removal Efficiency Test
Product | Removal Rate |
Tip Remover | Tip Remover |
Tip Remover (Semi-Conductive Type) | 85% or higher |
• Test Method: ATP (+AMP) Swab Test
• Measuring Device: Kikkoman Biochemifa Lumitester
• Procedure: Compare a rubber glove with dust attached to one cleaned
using the Tip Remover.
Results are based on in-house testing and may vary depending on the environment.
Reusable
Continuous Use and Dust Re-transfer Test
Procedure:
1. Attach dust to a rubber glove.
2. Grip the Tip Remover to remove the dust.
3. Reapply dust to the glove.
4. Repeat steps 1–3 to evaluate continuous use and re-transfer.
• Test Method: ATP (+AMP) Swab Test
• Measuring Device: Kikkoman Biochemifa Lumitester
Using hand washing with soap (cleanliness level 1490) as the baseline:
• The Tip Remover showed no dust re-transfer even after 100 consecutive
uses and made the gloves cleaner than the baseline.
• The Tip Remover (Semi-Conductive Type) showed no re-transfer even after 120 consecutive uses and achieved even greater cleanliness.
Cleanliness After Washing
Procedure: Compare cleanliness before use and after washing and drying the Tip Remover.
Results are based on in-house testing.
Result: Cleanliness levels before and after washing were almost identical, confirming that washing restores its original cleanliness.
No Silicone or Plasticizers
Adheres by Gel Tackiness
Product Structure
Tip Remover
Tip Remover (Semi-Conductive Type)
The hollow inner structure allows the soft urethane gel to conform to the fingers and remove contaminants effectively.
Designed for an easy, comfortable grip.
Applications
Ideal for environments where glove fingertips easily collect dust.
Can be placed not only on workbenches but also on walls or ceilings using its natural tackiness.
How to Clean
Rinse gently under running water while rubbing with your palm to remove dirt.
Once dry, adhesion is restored.
For longer, more hygienic use, you may also clean it with a disinfecting wipe or cleaner.
Customer Feedback
“Easily removes dirt from fingertips!”
The hollow structure makes it easy to grip with one hand and quickly remove dust or debris during work.
After rinsing with water, it can be reused many times, helping us cut costs.
“No worries about glue residue!”
We used to use peel-off rollers but were concerned about adhesive transfer.
Tip Remover contains no glue, so we can use it safely and comfortably.
Product Lineup
Tip Remover
Product No. | Hardness | Size (mm) | Color |
TR00-14001 | Asker C30 | Ø80 × H50 | Blue-Green |
Tip Remover (Semi-Conductive Type)
Product No. | Hardness | Size (mm) | Color | Surface Resistance (Ω) |
TR01-14002 | Asker C30 | Ø80 × H50 | Black | 10⁹ |